Introducing surface functionality on thermoformed polymeric films
Sáez-Comet, Carlos (Eurecat)
Muntada López, Olga (Institut de Microelectrònica de Barcelona)
Francone, Achille (Institut Català de Nanociència i Nanotecnologia)
Lozano, Nekane (Eurecat)
Fernández Regúlez, Marta (Institut de Microelectrònica de Barcelona)
Puiggalí, Jordi (Universitat Politècnica de Catalunya. Departament d'Enginyeria Química)
Kehagias, Nikolaos (National Centre for Scientific Research-Demokritos)
Sotomayor Torres, Clivia M. (Institut Català de Nanociència i Nanotecnologia)
Pérez Murano, Francesc (Institut de Microelectrònica de Barcelona)
Fecha: |
2022 |
Resumen: |
We present a fabrication process for the production of 3-dimensional micro-structured polymeric films. The microstructures are fabricated in a single step using thermal nanoimprint lithography as patterning technique. The micro-structured polymer films are then transformed into a 3D shape by means of a plug-assisted thermoforming process, while keeping the functionality of the micro-patterned areas. The preserved functionality is characterized by water contact angle measurements, while the deformation of the micro-structured topographies due to the thermoforming process is analyzed using confocal microscopy and Digital Image Correlation (DIC) techniques. This combined fabrication process represents a promising solution to complement in-mold decoration approaches, enabling the production of new functional surfaces. As the microstructures are fabricated by means of a mechanical modification of the surface, without the need of chemical treatments or coatings, the presented technique represents a promising, simple and green solution, suitable for the industrial fabrication of 3D nonplanar shaped functional surfaces. |
Ayudas: |
Agencia Estatal de Investigación SEV-2017-0706
|
Nota: |
Altres ajuts: this work has been performed within the PLASTFUN project (Planta Pilot de Peces Plàstiques amb Superficies Funcionals Avançades), within the Industries of the Future community (IDF) RIS3CAT, supported by the European Regional Development Fund (ERDF) as part of the operative frame FEDER of Catalonia 2014-2020 EC [COMRDI 16-1-0018], included in the 7th Framework Program. AF, NK and CMST acknowledge support from the CERCA Programme of the Generalitat de Catalunya. |
Derechos: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original. |
Lengua: |
Anglès |
Documento: |
Article ; recerca ; Versió publicada |
Materia: |
Thermoforming ;
Nanoimprint lithography ;
Plastic injection molding ;
Surface functionalization |
Publicado en: |
Micro and Nano Engineering, Vol. 14 (April 2022) , art. 100112, ISSN 2590-0072 |
DOI: 10.1016/j.mne.2022.100112
El registro aparece en las colecciones:
Documentos de investigación >
Documentos de los grupos de investigación de la UAB >
Centros y grupos de investigación (producción científica) >
Ciencias >
Institut Català de Nanociència i Nanotecnologia (ICN2)Artículos >
Artículos de investigaciónArtículos >
Artículos publicados
Registro creado el 2022-10-07, última modificación el 2023-05-01